Small spray dryerThe laboratory is still dry research leader, but our company according to the quality and precision of small spray dryer domestic production shortfalls in the system upgrade, so as to get a better effect and effect.

●SIEMENS color large touch screen operation, SIEMENSPLCThe program is programmed with automatic control and manual control. The panel is set in both Chinese and English, and the experimental parameters are set automatically

●The control switch employs the Schneider brand.
●Real-time regulationPIDConstant temperature control technology, accurate temperature control, heating and temperature control accuracy±1℃.
●Spray, drying and collecting devices are made of transparent, high quality, high temperature resistant borosilicate glass,The whole spray drying process is visible.
●Two atomization structure of fluid spraying, high precisionThree hundred and sixteenStainless steel materials, the size of powder injection is normal distribution, good liquidity.
●The anti blocking needle is adjustable in frequency and will be removed automatically when the nozzle is blocked so as to ensure the continuity of the experiment.
●The feed quantity can be adjusted by feeding peristaltic pump.
●Special protection function, the fan does not start, the heater can not start, the air compressor does not start, the peristaltic pump can not start (in order to avoid the wrong operation, resulting in experimental problems, or equipment problems).
●Built in imported oil-free air compressor, noise less than50db.
●Equipped with air inlet filter to make sure the sample is pure.
●After drying products, uniform particle size,95%Above dry powder in the same particle size

●Later stage can be upgraded with low temperature spray drying and organic solvent spray drying.

 Small spray dryerDevice parameter:

OneWater evaporation:1500 - 2000

2、Minimum feed rate:50ml

ThreeLiquid delivery pump:FourRotor pump (feed pipe):Imported silica gel peristaltic tube

4、Atomization: two fluid atomizing nozzle

FiveNozzle caliber: Optional07/1.0/1.5/2.0/2.2mmStandard configuration1.0mm

SixAverage drying time:One～1.5s

SevenTemperature setting range:30-300℃PIDAutomatic control; (temperature can be set)

EightTemperature regulation accuracy: inlet temperature±1℃

9、Fan: single phase low noise fan, fan flow:95m³/minWind pressure:1.1kpa

TenTemperature sensor:pt - 100Thermocouple

11、Range of spray regulation:0-0.8 MPa(suggest0.2 MPa）

12、Spray pressure intake:106L/minExhaust capacity:36L/minInput power580w

ThirteenSpray air compressor: Taiwan imported dolphin brand oil-free air compressor

FourteenCeramic electric heater power3.5kw

15、Rated voltage:220v / all rolling stock required to operate on

16、Air inlet: fiber cotton filter

SeventeenLiquid delivery pump flow range adjustment:0-26ml/min

EighteenElectric box heat dissipation: BrushlessDCMotor fan fan hot

NineteenSpray air connection caliber: outside diameter6mmtrachea

TwentyOverall dimensions:550 (w) x650 (d) x1300 (h) mm

21、Equipment control mode: touch screen control adopts SIEMENS brand

22、Control procedure: AdoptionPLCSIEMENS brand

23、Main electric box: SIEMENS and Schneider brand

24、Machine material/Weight:304 / 110